The Badu TOP centrifugal...
Warning: Last items in stock!
The Badu TOP centrifugal swimming pool pump, renamed to PS600CS-15-1 for solar and or battery operation. Upto 10 hours of trouble free direct solar pumping with a flow rate up to 15 m3/h.
Very simple installation.
maintenance-free thanks to brushless DC motor.
high reliability and life expectancy.
2 years manufacturer's warranty against defects in material and workmanship
swimming pool water circulation through a filter system and thermal collectors pond management irrigation aquariums etc.
Pump end (PE) monoblock-type pump with integrated strainer tank bellow mechanical seal is mounted on a plastic shaft protected sleeve
motor/pump shaft has no contact with fluid - total electric separation
strainer capacity approx. 3 l
strainer basket mesh size approx. 3.2 x 2.6 mm
Material used for pump end, pump casing, strainer basket: PP
flange, gland housing: PP TV 40
diffuser: PP TV 40
impeller: PA 66 GF 30 / PC
lid: PC, transparent
mechanical seal: carbon / ceramic / NBR
bolts: steel, galvanized
ECDRIVE 600 BADU Top brushless, maintenance-free DC motor
controlling of the pump system and monitoring of the operating states mounted at surface (no submerged electronic parts)
two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
automatic reset 20 minutes after well/pool probe turns pump off
protected against reverse polarity, overload and high temperature
speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
solar operation: integrated MPPT (Maximum Power Point Tracking)
battery operation: low voltage disconnect and restart after battery has recovered
max. efficiency 92 % (motor + controller)
max. flow rate [m3/h] 15 (solar), 13 (battery)
max. lift [m] 14 solar, 13 battery
ambient temperature [oC] -30 to +45
input voltage solar generator: nominal voltage 48-72 V DC
open circuit voltage max. 150 V DC
battery, DC source: nominal voltage 48 V DC
type of enclosure IP 54
dimensions (net/packing) 395 x 175 x 165 mm / 450 x 250 x 250 mm = 0.027 m3
weight (net/gross) 4.5 kg / 5.3 kg
motor max. power input [W] 600
type of enclosure IP X4
class of insulation F
suction / max. positive inlet lift 3.0 m
max. casing pressure 2.5 bar
max. water temperature +60 oC
Motor + Pump End ECDRIVE 600 BADU Top + BADU Top 12 520 x 220 x 350 mm = 0.0400 m3
weight (net / gross) 8.7 kg / 9.7 kg
No customer reviews for the moment.